Home > Parts for iPhone > Parts for iPhone 4 > Parts for AT&T/GSM iPhone 4 > Front Glass, Digitizers, and LCDs >

  LCD Screen and Digitizer Assembly, Black, for iPhone 4 AT&T
LCD Screen and Digitizer Assembly, Black, for iPhone 4 AT&T


 
Alternative Views:


Price: $38.99
Condition: New
Warranty: 90 Days
Network: GSM
For Apple Model(s): A1332

Stock Status:In Stock
Product Code: 822-4144
Qty:

  
Description
 

Replacement screen assembly for iPhone 4, AT&T Only, Black

Part Specifications

Size: 3.5"
Material: IPS
Resolutions: 960X640
Screen colors: 16.77 M
Type of Flex Ribbon Connector: Clip
Carrier: AT&T

Tech Note: This part is sold as an assembly because the LCD Screen is glued to the digitizer and glass assembly. The parts need to be assembled in a clean room with sophisticated equipment. Also, it will be very difficult, if not impossible, to disassemble your iPhone screen digitizer from the LCD Screen or Front Glass without damaging anything.

Device Features:

iPhone 4 posses a 24% thinner frame than the iPhone 3GS and the iPhone 4 adopts the retina display which features 3.5 inches and 960x640 pixels screen. Compared with iPhone 3GS, the 326 pixels retina display of iPhone 4 is four times as many as the iPhone 3GS. iPhone 4 also has a 800:1 contrast ratio which is greater than the iPhone 3GS. Apple iPhone 4 LCD and Digitizer Assembly with Frame (AT&T) includes LCD screen, digitizer touch panel, digitizer frame, foam gaskets for display and digitizer, receiver nets and so on. Compared with Apple iPhone 4 LCD and Digitizer Assembly with Frame (Verizon), the slots of digitizer frame of iPhone 4 LCD Screen and Digitizer Assembly is asymmetric, while the Verizon versions slots are symmetric.


Customers who purchased this item also bought...
Wiha 26761 Precision P1 Pentalobe Screwdriver
Price: $18.99

Add
Wiha 26761 Precision P1 Pentalobe Screwdriver