Complete LCD, Digitizer and Glass Screen Assembly, White, fits iPod Touch 4. Limited supply available.
The 1359 assembly has a flat edge around the glass, as opposed to a rounded edge on the 1369 which is closer to the original. The 1372 iBic screens are tested more thoroughly and generally are better assembled.
Note: On the 4th generation iPod Touch, the Glass, Digitizer (touch sensor) and LCD Screen are glued together at production in a dust free environment. It is important to buy the complete assembly when performing a repair because you will not be able to separate your display assembly into individual pieces.
This is a complete LCD and Digitizer Assembly that fits the iPod Touch Gen 4. It includes Pre-Assembled Digitizer, Glass and Retina Display LCD Screen. Compatible with Gen 4 iPod Touch Only Model #A1367.
Before installing, power off the unit completely by holding down the power button and sliding the red arrow to the right that reads "slide to power off." Change the screen. If after the installation the screen is white, press the home button and the power button together for at least 10 seconds. This will hard reset the iPod and the Apple logo or battery symbol should appear.